In 2004, I visited Veilside's Tsukuba development area during the build of the Fortune FD3s. Yokomaku-san ran us through the build and his intentions.
Although the front of the car was striking, The first thing that grabbed me was the rear of the car. It was soooooooo wide I couldn't believe it was an FD.
Built on an early Combat Evolution kitted FD3s You could easily see how much of the original body remains. Basically the roof and half of the doors. The vented fronts were amazing.
Yokomaku's vision for the car was based off a Samurai's Armor. He explained that the lines would become studded and riveted armour. At this stage the car was only set for the Tokyo Auto Salon, but with some help it eventually made it's way onto the big screen.
The armour lines were still in the imagination at this stage of the plan.
Yokomaku-san states "I never draw concepts on paper before I start to shape.
The ideas and inspiration are all here in my head. I can shape and create a design directly by hand as a 3D full sized design. Really, I find I work best like this - and this is how I've shaped all my designs from the beginning. The process for making a design starts with foam - like this, which is used to make the initial shape. By shaving it, I can get a clear shape.
Next, I cover the foam shapes in glass fibre, which gives the shape rigidity. You can see some glass fibre here.. - which is like putting a bandage over one's skin. Once the glass fibre's hardened, I apply clay - and this allows me to shape to exactly how I want the car to be. Then, once that stage is completed, I spray the bodywork with primer, so I can check and completely erradicate any minor imperfections.
Upon completion of the design, I use the 3 dimensional plotter to log the complete shape of the design to within 0.1mm. With this data, I can re-create the work by reversal of the operation.I can also use the 3 dimensional plotter to enable me to get exact symmetry between each side of the design and so get a perfect design as I complete it."
These days CG takes a big role, but it's the hands on design that made Veilside a legend. His designs may not be the most pretty, but they were definately the most distinctive.
Russ.







No comments:
Post a Comment
Enter a comment here...
--
Contact me anytime. Email RE-Xtreme.
--
Send me any info about any Fd3s related event or FD. E-mail Event Information.
--
If you want me to feature your FD, send me some pictures and a short story and I'll load you up in the owners section. Email a Feature.