Friday, 12 January 2007

Tokyo Auto Salon 2007


The covers came off for another year and in D1, Amemiya will use this car as their drift warrior. It has the rear end from last years red TAS car with the centre rotor styling.


The Porsche lights are replaced by IPF beams with a carbon surround and the carbon/IPF light combo sits in the rear also. Enkei GTC-01 are used all around and the car is otherwise the same as last year.


 This year has proved that THE FD IS NOT DEAD! In fact it is very much alive! With 16 examples on show it was one of the more prolific for tuners.


 Mind you 5 were from RE-Amemiya including the D1SL 7.


URAS had their new kit, but i think they couldn't decide on a colour in time. The flat black prototype effect was used like a gt-c car and it had a good effect.


Rolling on RE-30's from Rays that were on every second car at the show, it looked the part.


Can you pick the headlights...... no chance...... still no....? Well the KS Auto car with Burnout kit was equipped with what look to me were nissan march headlights, but I am probably wrong. A nice effect but we will see if it makes production.


RE-Amemiya's new white production model SPL was on show. Super Greddy II


The rear is ugly but the fenders are cool. Now a mix and match addition.


TOUGE MONSTER!


Satoru Works makes drift Knuckles for the FD. Better have Wide fenders though.


One of the replica fortunes.


There are many.


LookKing FD


Wheels are on the large size.


R-Magic Pink 4


GT300 car


Feed had the new production ready Afflux V


With moulded lights. Not the sagaris versions on the prototype.


Auto craft had their Rx8 and Rx7 at the show. The car is in race spec with all the items you require to go fast in winter. These monster V-Mounts are nigh for the air-conditioner.

 
A new light kit was their hot item. Very similar to the RE-A kit with a little smaller lights.



Parts from almost all manufacturers were on display in the Super-Autobacs FD project car. It sports a Feed/RE-A melded combo widebody with a monster engine, 



Custom V-Mount using ARC components and Feed engine internals.


Interior is awesome with a custom dash utilising Defi guages and some blue lighting. Tan suede and a huge ICE system round of this all-rounder rolling on 17" T57Pro Gram lights with the Titanium coat.


Oh-Gr8 complete with studded Bride seats, and another 8. A big display from the GT champion. Ama-san was also doing interviews at the mazda stand talking about his Cosmo restoration project.

Seats are for the sadist in us all.




AND WHATEVER YOU DO, DONT BUILD AN FD LIKE THE ONE FROM TOKYO NATS COLLEGE. DO NOT DO IT.



Looks like another good FD year ahead in 2007. 

Russ.

Monday, 1 January 2007

Happy New Year 2007


Well the year has started much like the last only this year there were no huge parties in the streets like in Surfers Paradise. I went to a shopping centre as is custom in Japan. There were some fireworks supplied by the Disney corporation but thats about it.

Big plans for 2007, with the theme for my new car firming all the time. Plans for the new Mazda Rx7, Well they seem certainly off now until 2009 with new magazines splashing the pages with more speculation and chopped images. Rumors for this year also involve a 3 rotor turbo D1 car and a few other specialties? The touge challenge, D1 and Super Taikyu will hold interest. Watch out for some more modelling and maybe some R/C Drift.

I will continue to update this site with a diary of modifications and reviews of events and all that.
I am currently back-loading demo cars from the 90's. Check them out in the tuners section.

How long can the Rx7 hold on. Another year at least. 20 years is a long time, bring on the anniversaries.

Feel free to send me info on anything FD related and please comment on anything you see or add my blog feed to your site.

Enjoy RE-Xtreme. The difinitive home of the Mazda FD3s Rx7.

Russ

Monday, 25 December 2006

Merry Xmas 2006

Bet you didn't know Santa really delivers by FD Rx7. Caught here in preparation for his delivery schedule. He managed to get some sponsorship from Apexi however since no-one will see him on the night, thats a bit redundant.

Hope you all had a great year and you got all the tuning parts you desired for Xmas.

Keep modifying and Safe driving over the holidays.

I have concieved the direction for the New Secret Rx7. Now you'll just have to wait for 2007.

All will be revealed.

Russ.

Wednesday, 8 November 2006

Newera Tokyo Drift

For the first time in the trilogy of Fast & Furious fims, the genuine original movie cars are available, exclusively through Newera Imports!
During the making of the film, it would’ve been inappropriate to release news of Newera Import’s involvement in the supply of the original movie cars and performance parts to build them, but now the film’s been released wordwide, the following original cars are available!

These include: Veilside Fortune RX-7, Veilside Turbo RX-8, 350Z’s prepared by Top Secret & Veilside including the grey & black twin turbo’d example, S15 Silvia, Turbo’d PS13 Silvia, Skyline R33 GT-R’s JZX100 VVTi Twin Turbo Chaser and more!

For FD fans this is massive news as one or two lucky people will have the opportunity to acquire the awesome Fortune FD model. The Rx8's are also a massive attraction.
View the Newera stock list for further details of these amazing machines.

Russ.

Wednesday, 1 November 2006

Aoshima FD Kits

There are a couple of new Rx7 Plastic models out and these are the new releases from Aoshima based on the RE-Amemiya drift car used in the D1 championship. There are two versions of this kit 2004 and 2005 which has a different front bar, different lights and stickers. An S-Package Kit also uses the 2005 front and AD-GT kit but includes the lights from the 2005 model and the full interior.

The RE AD Kit is well shaped and the quality of the kit is superb. For those of you familiar with the other FD kits from Aoshima such as the C-West or Veilside kits, this one is mostly different. Many of the parts have been revised, with the body itself is a whole new shape.

The wheels have changed to Fujimi style female mounting points and the body panels do not match the older vehicles. Which is a shame. But you can build it with the old rim style as parts are included. Which is good for me as I love the GTR Nismo rims from Tamiya.

But the D1 cars also have full interior with cage and other nice items. Wheels are Enkei as seen on the Re-Amemiya drift car, but are not really big enough. The drift car runs 17"s and 18"s so that cant be replicated but they are good looking rims. It will also be interesting to see how low I can get his car as the oringinal positioning seems very high as is usual with these kits. I have a tutorial on my old site and the method should still apply.

A good kit and the body went together absolutely perfectly. 2000 yen or 1500 if you know where to buy... Yodobashi Akihabara has a huge new model section thats very cheap.

Russ.

Tuesday, 24 October 2006

Hakkone - Izu

A glorious sunny was perfect for the cruise. We tagged along with the GTR boys on a hike from Tokyo to the Izu penninsular. We started the day from the Hakone Turnpike which is an awesome wide road with some amazing bridges that span the valleys and provide a view to the coast, If you dare to look.

A small deviation saw a thin winding downhill then a silmilar uphill to the ???parkway.Our adventures then led to the Izu Skyline where we blasted along in either direction for a while before continuing to some more well known locations later in the day. Namely the Hakone skyline pre-empted by the Ashinoko Skyline these roads are quite tight and offer limited passing so you have to be brave and use all your cars power and your own commitment.
The cruise back to Tokyo met its usual traffic problems but it helps you wind down after punishing your body in the Bride seats. On the Mountain Touge, it doesn't matter what car you drive. But we all know some are just made for it. The Fd is one such machine.

Russ.
ps. watch out for hachis, they are quicker than you think.

Thursday, 24 August 2006

Single Twins

Lets face it, the standard Fd is no ballistic missile, but it can hold its own against other unmodified sports cars. However, its not long after purchase that many owners start longing for more oomph. Few people are ready to spend a huge load of cash and generally progress through a boost up scenario adding inter-cooler, exhaust and computer.

Soon after this, the search for more power bites again and the only option left is a turbo upgrade. So deciding how far you want to take your Fd, should be thought about up front to prevent spending twice on similar components like a header ( dump ) pipe that will be useless in a single turbo setup, like wise, airfilters are throw away items for a single upgrade, but do you need to go single?

The standard twin turbine setup on the Fd is not bad, it definately has advantages in anti-lag spooling and also some drawbacks, like the nest of wires and troublesome control mechanisms, but the major one is a maximum efficient power output of around 350hp. If you dont want to redesign your engine bay for a single, you have a few options when searching for a litle more power in this department. A rebuilt turbine with replacement compressor wheels can be performed. Knight Sports goes a little further with their own design twin turbo replacement good for approx 420hp. This is as much as most single turbo conversions.

What about Single Turbos?!?! With advances in turbo design and knowhow that surrounds them, a 450hp single can provide good power across a wide power band or you can opt for the laggy & peaky, huge power options up to 650hp from your 13b. You'll have to spend up big on ancilliaries like fuel pumps, injectors, wastgate, manifold, filter, exhaust header and a bunch of other items that probably wont match anymore, but the less clutter in the engine bay and the simple design could mean less trouble in the future if you dont go too mad.

So whatever you end up with under the bonnet, do the hard yards first, drive one of each and feel the difference yourself. You may decide a single turbo is indeed over-rated. But for me, Ill have a 1000hp triple HKS GT2835 sequential setup on a 20b. Now that should be enough!!!

Russ.

Friday, 18 August 2006

Split Lip

Front splitters, canards and undertrays are often seen on the demo cars we all love and we find our selves wanting them even though we don't really understand the effects they will have on the car. When you get this far into tuning you probably do have to understand that practicality has already gone completely out the window. Low ride height has resulted from stiff coil-over suspension and we are searching for those lap time minimising devices that can shave the odd 1/10th or reduce drag for outright speed.

For cruising around the street I wouldn't recommend these devices. Apart from the fact they are probably illegal child mauling additions, soon after addition the ability to negotiate the local shopping centre speed bumps and driveways become a nightmare and you find yourself driving to the track and thats it. Which may not be all bad if you go often enough.

Downforce and airflow, Cd and drag are all the keys in aerodynamics and the addition of well designed canards and splitters that aid and don't hinder airflow should all make a definite difference. Can you feel the effect on the street? Maybe on the C1 or your favourite blasting road, but anywhere else you probably wont be going quick enough. How efficient is the Fd anyway? I guess anything can be improved and slapping a flat piece of carbon under the car is an easy way to see whats going to happen. Usually the simple addition of the front underpanel creates an oversteering machine, so balance is all important. These race items can have a real effect on suspensions settings. Spring rates and rollbar changes could all be required, to balance the way the thing handles. But in reality, street use will never really warrant a splitter and diffuser. If you want to get a defect notice from the cops for dangerous bodywork or go to jail for chopping off some little girls foot as you drive past, go right ahead. I'm getting mine for the latter reason. They just look damn cool!

Russ

Diffusion Confusion

What do these things do? Why do we love this carbon creation that hits on every low gutter and scrapes on everything.? We just do! A well designed rear diffuser creates a pressure zone behind the car that feeds the rear wing and adds better overall downforce in a straight away for stability. This downforce comes at the cost, but luckily the high aerodynamic drag coefficient is reduced by the diffuser also as it smoothes airflow around the rear.

The key to the compromise is smooth airflow, so these parts are usually linked with a front splitter and smooth undertray thats allows for the smooth airflow right beneath the car that effectively sucks the car to the road. That's why F1 teams spend wind tunnel money. A small wing or undertray adjustment can have a huge change in straight line speed or downforce through cornering, even though the under body of the car is flat.

For lovers of the wingless Fd this is a true alternative to the GT wing. That can add downforce in a subtle way. However, use it in combination with a GT wing and an all round aero package should see lap times dropping as cornering speeds increase.

The four main companies producing these for the Fd are RE-Amemiya, Sanai-D, Craft Company and Ken Style. There are others that have some effect but none are as full on as these. If you do manage to attach one to the rear of your Fd, please be careful when reversing. Carbon is expensive.

Russ