Thursday, 27 November 2008

SAB Meeting - R-Magic

Ok, The Official R-Magic display at the Super Autobacs Meet was small with only Takayama's D1 car on display but the customer cars were out in force. Some could be considered Demo cars as they wear the full catalog of Aero and performance upgrades.

Firstly I'll start with a walk around of the D1 machine. Right side features RAYS Gram lights 57D in Orange.
The fenders are a little scarred but the car has had some offs during the year and it's driven extremely hard every time.

Front bumper is attached with this spring mechanism for easy access. For those of you who have an FD with this kind of kit you'll appreciate the distance you have to lean from the front of the car to access the engine bay.

The front lip is litterally a mile from the AST so leaning over does your back in. My RE-A 9 front was like this. So an easy removal is necessary for fast pit work. This Engine is a 500hp monster.

R-Magic is the Voltex of the FD world. Small add on canards and lips totally change the look of the car. Pinky"6" is looking very cool.

In this image you can see the bonnet has been further lightened. The tow hook and the crazy plank tower bar. Simple but effective.

Bonnet dampers are a good idea on an FD too. As the wind can often damage the top pointy coners if the bonnet blows back.

Beside the D1 car the normal N1 wide body kit looks a bit tame. Especially without the bonnet.

Amost looks too plain and you walk past cars at an event like this. You have to go around a few times to find the interesting parts combinations.

Rear fenders really fatten up the rear a lot more than the RE-AD or Feed bolt on kits.

Now this is my Favourite R-Magic car.
1. because it's white.
2. because its still street registered.
3. because it has 600hp
4. because it can lap tsukuba in 57seconds.
and
5. because it looks F****** tough on RAYS RE30.

Maru san's Time Attack warrior will be hitting tsukuba again over the winter months. Expect some fast times.

Compare that car to this dress up focussed machine and there is a contrast. Carbon is on display here.

Yellow and carbon combo is a bit too Initial D for me. The wheel offset doesn't have the sam aggression as the kit.
For me the painted front looks much better. But hey I wouldn't knock it back as a daily driver.

Rear end is just as busy with a custom rear lip spoiler between the huge R-Magic Pro Staff rear wing. This one also has a RE-A diffuser.

This one is another car that has been slowly progressing aver the last few years. It now has 18" RAYS CE28N in Black. Carbon is almost indistinguishable on black cars. Maybe next year it will get the new R-Magic Bonnet.
This car struck my eye because it is probably a great street car. Sensible mods free of widebody craziness and a mix of parts that somehow is very cohesive. I give this a 9/10
I still love feed bonnet and Veilside skirts because they really enhance the lines of the FD.

I'd change the mirrors for craft square but thats it. Subtle but effective.
R-Magic's PINK has a lot to answer for. This one goes under the radar.

But you sure can't miss this! Add a set of wheels and you'd have a nice car......

That needs re-painting. haha. He/She had a small collection inside.

Now normally on RE-Xtreme I don't post Other Rotors But i'm more open minded these days. Especially when cars look this cool.

R-Magic RX8 aero and 19" Volk GT-C set it off nicely.

This FD was parked upside it and wore circa 2003 Need for speed underground graphics.

This one however wore the older cherry pink warpaint. Which i find a little more tollerable to the current shade. Having owned 2 FC3s previously, I still have a soft spot for them. This car has amazing presence and while it only looks ho hum in these pics, on the street it looked amzing.
Russ.

Wednesday, 26 November 2008

SAB Meeting - Revolution



Revolution: TA-2

Here is a look at the most hard core FD out there at the moment in Japan.
Take a Super GT race car body in full dry carbon and attatch it to an FD shell that remarkable still retains the original strut locations.



Spend two and a half years building and refining it and you you have a very potent Time Attack weapon and an insane demonstration of your ability.

I spoke to the creator of this beast and he told me about some of the complexity in obtaining something of this level. But basically he did it mostly himself with hand fabrication of many parts.

Inside it's all business with hewland trans and Motec dash. These guys have strong ties with AVO in OZ and use the latest Motec equipment.
RAYS do the wheel duty and the bronze RE-30 look awesome. When you spend a while looking around this car you can see the amount of custom work that has gone into it. The car runs 18 inch rubber, but as the Super GT body runs fatter profile tyres the 18/265 and 18/295 combination from Hankook tyre sit a little awkwardly in the fenders.

The RE-Amemiya body is really just a small part of this car. Finishing it and making it into a race car is much more that whacking on this kit.

Rear brake package would be more than enough for any street car on the front. HUGE callipers and rotors help this car stop from 280kph at Fuji Speed Way.
Some panels dont match exactly, but Revolution have done an amazing job with this machine. The next test is on the 4th Dec and the Rev Speed battle is Dec 10. Already lapping in 56 region in testing. Lets hope they can break the tsukuba lap record for RWD.


Revolution RX-Race RX8:

The Rx8 Race in Japan has been going on this year with complete dominance from knight sports who built a full on race car. In order to get closer to them, Revolution have added carbon doors and lots more mods to get their 8 competitive.

It's now looking ultra tough and is still a fully street legal machine. Under the bonnet you'll find the Revolution RX8 catalog and some carbing touches.

18 inch RE30 also do the the duty on the 8 although the size is a little smaller than the FD.
There is one more demo car in the Revolution stable, TA-1. That wasn't at this event but it should be out and about again soon.

Russ.

Sunday, 23 November 2008

Rotary Designs

The Super Autobacs RX7 meeting is an event I love. I spent a couple of hours wandering around. The shapes and curves of Mazda designs are just cool. When you add a little tuner creativity they just get better. Here are some of the coolest photos I took at this years event.

RE-Amemiya Door handles and Bride Maxis III

Knight Sports Fender Duct and Gun Advan RS

FC and Enkei
Knight Sports Version VI and a touch of Canard

Leg Sport 8 and a touch of WEDS SA-67R

R-Spec Rays Endless Mazdaspeed Madness.

Odula and Gram Lights.

Odula Lip - The best

FC, Pan Speed and a touch of DIY

Volk Racing is R-Magic

Revolution and more than just a touch of Carbon 50% custom. 100% cool!
Inside and Out.

Super Greddy III - 90% Custom Rear with IPF

Super Greddy III with finishing touches.

RE-Amemiya D1 Body. This kit only looks good from a few angles.

R-Magic D1 winged madness.

And Canard heaven. I:z are still cool.

1 of everything on this car.

Varis and SE37K - dope

I have full car pics that I'll be posting. Stay tuned. There were only about 200 cars.

Saturday, 1 November 2008

2003~4 Memories

These shots have lived as computer screen backdrops for a long time. Shot by myself and a friend in 2003 and 2004, it was always a nice sight pulling up at Tatsumi or Rainbow Bridge parking areas. Full on ballistic machines tuned specifically for the C1. This MCR tuned S15 and the Blue Zimax FD were regulars and wear the telltale scars of high speed highway battle.
C1 racing in the 90's and early 2000 used to be a nightly un-opposed battle ground for the challenge of highway supremacy. These days are long gone. Parking areas are closed off after 11pm and the police keep a maximum pressence. Lanes of traffic are also blocked these days to prevent racing.
The Wangan bayshore B route down to Daikoku Futo Parking area was also a nice place. But these days it's a bumpy hell. It was a regular sight to see many a car scream past at over 250kph.

But unfortunately the FD is rarely seen on the C1 anymore. But there are fast cars around (recenlty saw Carrera GT, McLaren GTR, XJ220 and Diablo GT) but the days of nightly battles for all but a few are gone.
This last shot is just before my first FD headed back to OZ from Japan.
Ahh the good ol days. I miss them.
Russ.

Thursday, 30 October 2008

Newera FD Version Up Preview

Miguel's been tuning again. This time a full rebuild after 6 years and thousands of VERY hard driven kilometers. I doubt you would find an FD street car that's been driven much harder on the street. Anyway when the time came to rebuild, Miguel always upgrades. If you're going to replace, replace it with something better.



Knight Sports is his chosen tuning house. Their quality of workmanship is second to none. They prepared a full chassis dyno and the engine has already been run in on the engine dyno. This is a 1.1 bar engine build that will be reliable at that boost. The single turbo is no pumping out 431 bhp @ the wheels. The old LOUD Titanium exhaust has also been replaced with this quieter KS Titanium item.


The RE-01 tyres will not last long, but it will be fun destroying them. When we go out, again I'll take some new pics. Some LED rear lights have also been added. I realise I haven't really done a complete feature on this car. Just bit's and pieces. I'll get the full spec updated soon.


Visit http://www.neweraimports.com/ or http://www.neweraparts.com/


This last pic is from a trip to Hakkone a while ago.
Russ.

Big Cups of FD

Chesters ride is clean but well sorted with only the best components sourced directly from Japan. It's been a pleasure to see this car progress from a near stock example. I know only too well the money it takes to do acar properly and the results speak for themselves.

Dynoed by Rotormaster with a final 356.6RWHP 14psi. It's probably over the limit of standard with the Twins.

'00 MazdaSpeed GT-Concept FD3S Series 8 (Version 5) RX-7
MazdaSpeed GT-C Front Bar
MazdaSpeed GT-C Skirts
MazdaSpeed GT-C Wing
MazdaSpeed GT-C Combo Lens
Sanai Works Carbon Fibre Rear diffuser
Ganador Carbon Fibre Aero Mirrors
RE-Amemiya Carbon Fibre AD9 Bonnet
Fujita Engineering Vented Headlight cover
Fujita Engineering Front Combo lights
Wiperless Rear Hatch
Rear Guards pulled 10mm
Front Guards rolled and inner guards modified
Bellof White HID Kit
------------------------------------------


SSR Professor SP1 in custom Type-C bronze
19x9.5inch Fronts 225/35
Marangoni Mythos Tyre
19x11inch Rears 245/35
Marangoni Mythos Tyre
Work Emotion 50mm Racing nuts
-------------------------------------------
Ohlins 'by Panspeed' Coilovers w/adjustable dampers
Mazdaspeed Front sway bar
Mazdaspeed Rear sway bar
Mazdaspeed Bushings
Makers Rear Pillar bar
Cusco OS Front strut bar
Cusco OS Rear strut bar
Cusco OS-T Rear triangle addition
SuperNow Camber Pillow Balls Front
SuperNow Camber Pillow Balls Rear
Cusco 1.5 way LSD
Exedy Hyper Single Pull type clutch
Endless SS-S Brake pads front and rear
Anodized Front and rear calipers

-------------------------------------------


13B-REW Twin Turbo
Stock Internals
Blitz 3-Core Front Mount Intercooler with polished piping
Koyo Type-Z 53mm Radiator
Greddy Elbow with Blow off valve flange
Greddy RS Blow off valve
Greddy PlugsGreddy Almite Oil filler cap
Greddy Water pump pulley
Greddy Alternator pulley
RE-Amemiya Idle pulley
RE-Amemiya Power steering pulley
RE-Amemiya Crank pulley
Sard 280L internal fuel pump
HKS Race Suction polished intake piping and filter pods -To arrive
ARC Tank Cap -To arrive
ARC AST Cap -To arrive
Weds Rev Cover Reservoir Sock -To arrive
HKS EVC 5 Boost Controller (10psi low & 14psi high)
Apexi Power FC Makers Radiator Outlet Tank and Aluminium Air separator tank
Knightsports Power Torque Rod
Knightsports 80mm Metalit Catalyzer
Trust 80mm Front pipe
5zigen 80mm muffler
Airpump eliminated
RS-Pantera Engine Rod
Cusco Oil Catch Tank
Fujita Engineering Carbon Fibre UIM Cover
Ultra Earth Grounding kit
Buddy Club lightweight Racing battery
--------------------------------------------

Momo Mod.02 350mm 80mm offset Steering Wheel
HKB Boss kit
Mazdaspeed Carbon Fibre gear knob
Mazdaspeed Carbon Fibre cluster surround
Mazdaspeed Carbon Fibre stereo/AC surround
Mazdaspeed Carbon Fibre centre console
Mazdaspeed Carbon Fibre right hand door armrest
OEM Carbon Fibre scuff plates
OEM Carbon Fibre steering shroud
RE-Amemiya Version 6 300kph Speedometer
RE-Amemiya Carbon Fibre 3-meter pod
HKS DB RS Boost gauge
HKS DB RS Temp gauge
HKS DB RS Press gauge
HKS DB RS IF Control unit
HKS Turbo Timer
HKS EVC 5 Controller and display
Apexi Power FC Hand Controller and holder
Bride Gias Carbon Kevlar Driver seat
Bride Gias Carbon Kevlar Passenger seat
Bride Type-RO seat rails
Bride Gradient trimmed Rear seats
Sony Video Camera with Camera Racing mount
Addzest Double DIN CD/MD player
Take that bank balance~!!

Russ.

Saturday, 11 October 2008

RE-Xtreme in HPI Vol 98.

Just before my car was shipped to it's new owner in the UK, Mr Italy (Dino) and I took it up the road from my house for some pics. I held off posting until now as this is now a feature in an Australian magazine, High Performance Imports Vol 98. (HPI)

See a couple more of the final pics on my other blog RE-Xtreme II.