Tuesday, 21 September 2010

Wheel Size, Offset and Stance Guide!

What is a good wheel and tyre combo and offset for an RX7?

Everyone has different opinions on stance and offset.  For looks, my feeling is to get the wheels perfectly flush with the fenders. I also like a thinner tyre profile and a tiny bit of strtch, but thats just personal preference. It is by no means optimal for fastest lap times.




Mazda OEM
Mazda FD3s P.C.D is 5Hx114.3
Wheel nuts are M12x1.5
Ceter bore for fitment is 67mm diameter.

Mazda 1991 Enfini E-FD3s was fitted with the same side all round.
F&R: 16 x 8.0JJ +50.

BBS Japan Mazda OEM Efini RZ
F: 17 x 8.0JJ +50
R: 17 x 8.5JJ +50 



The 1999 Mazda Rx-7 GF-FD3s was fitted with a few different combinations.
RB wheels were the same front and rear and also featured on the 2001 RBR

F&R: 16 x 8.0JJ +50


Type R and RS wire different front and rear.
F: 17 x 8.0J +50
R: 17 x 8.5J +50


BBS Japan Mazda OEM 2000 Wheels
F: 17 x 8.0JJ +50 235/45ZR17
R: 17 x 8.5JJ +50 255/40ZR17
(Gun Metallic) were fitted to RZ
(Silver) were fitted to the RS model.


BBS Japan Mazda OEM Spirit R Wheels
F: 17 x 8.0JJ +50 235/45ZR17
R: 17 x 8.5JJ +50 255/40ZR17
(Silver) or (Gun Metallic)
Centre is different to RZ wheels.



After Market

Recommended offset differs for many Japanese wheel manufacturers and many depend on the actual wheel and offsets available from that manufacturer. Weds has a good variety and one of the few to still list the FD3s. It is out of production you know.

Tyre sizes also depend on usage, looks and individual manufacturers specs.

Ceter bore for fitment is 67mm diameter and many aftermarket wheels are 73mm diameter. Its a good idea to get some hub centric rings for any aftermarket wheels.

Width and offset recommendations are the same for all wheels diameters but basically the tyre dimensions will force a small change in offset and width from manufacturers.

17" Sizing.
F: 17 x 8.0 +38~42 235/45/17
R: 17 x 9.0 +35~42 255/40/17

18" Sizing.
F: 18 x 8.5 +38~42  225/35/18 ~ 235/35/18
R: 18 x 9.5 +38~42  255/35/18 ~ 265/35/18


17" Example on Stock Body.
F: 17 x 9.5 +28 255/40/17 Knight Sports Demo car.

R: 17 x 9.5 +28 255/40/17

18" Stance example - Stock Body (fender roll required).
F: 18 x 9.0J +29 225/40/18
R: 18 x 10.0J +37 235/40/18

18" Stance example - Stock Body (big fender roll required).
F: 18 x 10.0J +38 255/35/18
R: 18 x 10.0J +18 255/35/18

19" Stance  - Stock Body (fender roll required).
F: 19  x  9.0+22  225/35/19
R: 19 x 10.0+25  245/35/19


Blue C-West Advan Demo Car (aggressive fender roll)
Advan RS-D & Neova
F: 19 x 9.0+25 +3mm spacer 225/35/19
R: 19 x 10.0+25 +3mm spacer 265/35/19


Chester!
Version 1
F: 19x9.0 +24 235/35/19
R: 19x10.0 +11 265/30/19

Version II pictured
F: 19 x 9.5
R: 19x 11.0 Rear Fender +10mm Rolled

19x10.5 All around +12 from memory

F 225/35/19
R: 245/35/19


Fujita's Feed +25mm wide body recommendation.

Normal Wheel offset is 9.5J +35 (no modification to inners)
Demo cars have fender processing.
F: 18 x 9.5 +22~24
R: 18 x 9.5 +22~24 w +30mm spacer
255/35/18 all round


Owner Example.
F: 17 x 9.0 +22
R: 17 x 9.5 +12 no spacer
F&R 255/40/17


RE-Amemiya
Touge Monster with some guard Rolling
Enkei RP03 and Neova


2005 Option Magazine Car of the Year.

F:  17 x 8.5J +40 235/45/17
R: 17 x 9.5J +38 255/40/17

However RE-Amemiya lists the sizes as 

F:  17 x 9.5J +?? 255/40/17
R: 17 x 10.0J +?? 255/40/17




AD GT Kit variations.

Strikers FD3s Yellow/Black
Enkei GT-C01 & Toyo Proxes
F&R: 18 x 9.5J +38 255/40/18


Revolution TA-1 Street Demo Car
RE-Amemiya AD GT Kit with higher ride height.
Rays Volk RE-30 & Proxes R1R
F: 18 x 9.0 +35
R: 18 x 9.0 +35 +25mm spacer
F&R 265/35/18


Super Greddy 2
(AD GT Kit Type 2)
Enkei GT-C01 & Neova
F: 17 x 9.0J +18 235/45/17
R: 17 x10.0J +22 255/40/17


D1 Spec (Super Greddy 2) +
Enkei GT-C01 & Toyo Proxes
F: 18 x 9.0J +18 245/40/18
F: 18 x 10.0J +22 265/35/18

Super Greddy 3 #1 and #2
Enkei GT-C01 & Neova


F: 17 x 9.0J +40 255/40/17
R: 17 x9.5J +38 255/40/17

Super Greddy 3 #3 Green
Enkei GT-C01 & Neova


F&R: 18 x 9.5J +38 255/40/17 Rear spacer.

SGT Replica
Enkei GT-C01 & Neova
F&R: 18 x 9.5J +?? 255/35/18
F&R: 18 x10.5J +?? 265/35/18

Genki 7
Enkei GT-C01 & Neova

F: 19x9.5 +22  245/35/19
F: 19x10.0 +22  275/35/19


AC037 AZ’MAX号
 RAYS TE37 18 x 9.5J
F: 255/35R18
R: 265/35R18




RE-Amemiya +20mm AD-GT Widebody Owner example
F: 18 x 9.0 +22 235/45/17
R: 18 x 9.5 +18 255/40/17

RE-Amemiya SGT Replica
F&R 18"x10.5 +15  265/35/18

All you need to do is find wheels as close as you can to these.
If you can't get exactly what you need, then customise to make them fit.
Rolling, removing inners, flaring the fenders, whatever it takes.

20" will fit. But I am not going to list any. I personally don't recommend it unless you have a Feed Afflux V.

Semi Slick/S-tyres/R-Comp or whatever you call them have thicker tread and larger sidewalls for similar sizing. Go one size narrower for a better fit.

Weight and strength.
The cast vs forged wheel debate is always on. I have had both. Forged and Cast. It totally depends on your preference and setup. but I'd recommend forged wheels for lighter weight and strength but remember there are some really fast cars out there lapping tracks on cast rims and drifting with the best on heavy chrome 2 piece rims.

R Magic Pink 4
& TE37 SL

18x11.0 +18

Previous Spec
RAYS CE28N
F: 17 x 9.5J +35 255/40R17
R: 17 x 9.5J +15 255/40R17
ADVAN A048M


R Magic RE Quarter Panels.
F+25 R +30 wide body

Recommended 9.5J & 255 or normal wheel and +15~25mm Spacer
F&R: 17x9.5J +15 255/40/17


R-Magic Pink 6 D1
RAYS gram LIGHTS 57D and Neova

F 17 x 9.0J ?? 235/40/17
R 18 x 9.5J  ?? 265/35/18

Previous Spec
CE28N and Neova
10.5J×18 +35 Custom offset 265/35R18

10.5J×18 +18 +20mm Spacer 265/35R18


Confused! I am.
Russ.

Enter your sizes and click calculate

Compare a second size

Monday, 6 September 2010

RE-Xtreme Project 7:13.

 RE-Xtreme Project 7:13.

What makes a car like this one divide people.  People these days judge very quickly and say their feelings. Including me. Recent comments on SpeedHunters.com reflect that.

These days the options and variation in the tuning WORLD can create any style you love. My style is heavily influenced from JDM Drift and Time Attack. I will be using this for my next project 7:13.

I feel the BN sports kit retains the curves of the FD3s. In fact it absolutely slams them and over accentuates every one, then it adds the low and deep flares that made the drift style famous. I chose an accentuated aero-euro Mazdaspeed style rear wing for this chop to retain some celebration of the 1990's period and what serious track RX7 doesn't feature some kind of sleek lights. RAYS TE37 SL wheels were recently released in 19" designs. RAYS epitomize (did you think that word was wrong?) the Japanese scene and the panda colouring with a carbon vented bonnet is another example originating in and almost defining Japanese tuning.

For my project "7:13"B I added some raised lettering under the paint for subtlty and modified the front bar for my own stamp on this. Rear bar will be heavily modded along the Knight Sports line and of course there will be a monster diffuser eventually. About the only thing I haven't chopped here are some craft square mirrors.

So this is the direction I want to take for my project. I have been flip flopping between normal or wide body, but the answer is both. 7:13A will be something 100% stock. Maybe a renewed 199x Efini Rx7 and this Widebody 7:13B Drift/Attacker.

I'll be trying to finalise everything and kick it off before the end of the 2010.

Russ.

BTW 19" Time attack CE28N. JD YuM.

Friday, 3 September 2010

New Mazda


Nagare is gone. Kodou  "Soul of Motion" is here. This is my RE-Xtreme "Shinari" 7

Mazda's new design language is a little change from the widemouth happy smile from the last 10 years.

It is of course very dissapointing that is has been 10 years have almost past and there is still no sports car in the Mazda line up.

Unfortunately for RE-Xtreme readers is that the first concept with this is a huge coupe. I tried to chop it but the dimensions are so rediculously large that it doesn't translate well to a possible FD.

I chopped the rear lowered the bonnet about 3 inches. the car 3 inches shortened the rear by 10inches.

The interior is very FD stlye however. I could imagine this as an evolution.

lets see what mazda brings in the next sports car.

http://www.mazda.co.jp/corporate/publicity/release/2010/201009/100903a.html

Russ.

Arena


This car I first saw in 2002 at Fuji Speedway. The garage Arena demo car is a period correct spl.

Like many more tuned Rx7s these days, They are headed to the UK and other countries with relaxed import laws.


Actually, for me and local Japanese buyers here in Japan, we often end up competing with other foreigners on anything decent, thus raising the price usually out of my range.


Work Miesters in red, backed by Ohlins and best choice of era RE-Amemiya body. Interior has a stack guage set and carbon panels. Another street racer's dream car. Many cars of this era were tuned specifically for the street and radials, and many favouring usable reclining buckets over 100% full bucket seats in a car that had some other purposes. Lack of racing cage also errs on the side of very fast street and touge car.

Paint – Chaste White
Front Bumper – RE-Amemiya Facer GT / RE-Amemiya Bumper Carbon Canard
Side Skirts – RE-Amemiya
Rear Over Fenders – RE-Amemiya
Rear Skirts – RE-Amemiya
Rear Wing – RE-Amemiya GT (Dual Flap Adjustable)
Bonnet – RE-Amemiya AD 9
Mirrors – RE-Amemiya
Lights – RE-Amemiya Sleek Lights
Wheels – Work Meisters 18” Deep Dish
Lug Nuts – Work Aluminium Lightweight

Interior:
Stack Racing Carbon Data Logging Race Dash (http://www.stackltd.com/)
Carbon Interior Panels
Recaro SRII Bucket Seat
Sabelt Race Harness
Momo Commando Steering Wheel
RE-Amemiya Shift Knob
RE-Amemiya Boost Gauge
RE-Amemiya Water Temp Gauge
Blitz SBC Boost Controller
Carozerria CD Player GPS
Step Up Boost Controller


Drive Line and Handling:
SARD/HKS Racing Clutch
SARD Spec Flywheel
HKS Differential (LSD)
Gearbox Syncro
Ohlins Coilovers Adjustable Suspension (Circuits specification Japan)
Gearbox Bracing
Brembo F50 Brake Calipers (All documents present)
Uprated Brembo Discs & Pads All Around
Adjustable Rear Tension Rods
Flexi Lines
Bridgestone RE-711 Fast Street/Circuit Tyres

Engine:
Circuit Specification 13B Engine Block – Side Porting
Trust / Greddy T78 Circuit Specification Turbo
Trust/Greddy Turbine Shield
Trust / Greddy Cold Air Feed Induction
Trust / Greddy Lightweight Pulley Kit
Trust / Greddy Intercooler Piping
Trust / Greddy Lagged Downpipes
Trust / Greddy Large Front Mount Intercooler
Trust / Greddy Intercooler Spray Kit
Trust / Greddy Radiator (Large Capacity)
Trust / Greddy Throttle Body Elbow
Trust / Greddy Oil Filter Block
Trust / Greddy Blow off Valve
Trust / Greddy Oil Filter Re Location Kit
Racing Hi Flow, Low Noise Circuit Exhaust System
Silicone Water Hose
Silicone Vacuum Lines
NGK Racing Spark plugs
Uprated Fuel Pump in Carbon Canister
Ignition Amplifier

New owner informs me that the last power run made 505PS @ 1.2 bar boost. Just in the pocket.

Russ.

Wednesday, 1 September 2010

Option Wild Cards

Japanese car magazine option has released their latest magazine with a deck of playing cards.

2010 October Option magazine. Get it!

These can also be used as a trump game. They have all the 52 cars from the option wangan trials as well as bonneville and other test tracks.

I really bought the magazine just for these.

Russ.

Sunday, 29 August 2010

RE-Xtreme Logos


New Logo. The idea is to reflect the image of a street and mountain pass in the logo.


I recently updated my helmet with some block stickers and it gave me some inspiration to create something more.

I think it works well with Mazda style fonts. There is a bit of Wipeout Fusion. a bit of flower and a bit of lollipop. all good things.



During my design of a street I ended up with something a bit retro. Anyone guess the influence. I may be putting these in production.

Then things got carried away as usual.

Russ.

Developing a Fortune

Here is a bit of insight into something special. The Development of the Fortune FD3s.

In 2004, I visited Veilside's Tsukuba development area during the build of the Fortune FD3s. Yokomaku-san ran us through the build and his intentions.


Although the front of the car was striking, The first thing that grabbed me was the rear of the car. It was soooooooo wide I couldn't believe it was an FD.

Built on an early Combat Evolution kitted FD3s You could easily see how much of the original body remains. Basically the roof and half of the doors. The vented fronts were amazing.

Yokomaku's vision for the car was based off a Samurai's Armor. He explained that the lines would become studded and riveted armour. At this stage the car was only set for the Tokyo Auto Salon, but with some help it eventually made it's way onto the big screen.


The armour lines were still in the imagination at this stage of the plan.

Yokomaku-san states "I never draw concepts on paper before I start to shape.

The ideas and inspiration are all here in my head. I can shape and create a design directly by hand as a 3D full sized design. Really, I find I work best like this - and this is how I've shaped all my designs from the beginning. The process for making a design starts with foam - like this, which is used to make the initial shape. By shaving it, I can get a clear shape.

Next, I cover the foam shapes in glass fibre, which gives the shape rigidity. You can see some glass fibre here.. - which is like putting a bandage over one's skin. Once the glass fibre's hardened, I apply clay - and this allows me to shape to exactly how I want the car to be. Then, once that stage is completed, I spray the bodywork with primer, so I can check and completely erradicate any minor imperfections.

Upon completion of the design, I use the 3 dimensional plotter to log the complete shape of the design to within 0.1mm. With this data, I can re-create the work by reversal of the operation.I can also use the 3 dimensional plotter to enable me to get exact symmetry between each side of the design and so get a perfect design as I complete it."

These days CG takes a big role, but it's the hands on design that made Veilside a legend. His designs may not be the most pretty, but they were definately the most distinctive.

Russ.

Tuesday, 17 August 2010

Summer Drift Matsuri - Preview.

This weeks event schedule for me includes a bit of a trip to Ebisu Circuit to catch up with some friends. I'll be up at the Summer Drift Festival taking in the influence of Andy's FD3s. Expect a bit of a feature on this car and sights and sounds from others around the event.

Visit http://www.powervehicles.com/ for more of the grassroots G1gp.

Unfortunately, Andy is still prepping the FD, but lots of other Drift coverage here.
http://re-xtreme-extra.blogspot.com/2010/08/ebisu-summer-matsuri-videos.html
http://re-xtreme-extra.blogspot.com/2010/08/g1gp-ebisu-videos.html

Russ.

Thursday, 12 August 2010

Mach 5 Concept


Speed Racer and the Mach 5 was always a favourite.

I remember when I was a kid.... go speed go! Now all we need is the Jump System!

I was playing around with the Knight Sports Type 4 on my other blog and I thought this might be cool. I haven't done a concept for a while.

Russ.